Sets new standards for productivity and efficiency
Boehlerit, the carbide and tool specialist, is launching a new drilling tool on the market that optimises the production process and increases efficiency. The innovative Drilltec impresses with high cutting and feed speeds, a high metal removal rate and outstanding drilling quality. With the option of using 4 cutting edges, the Drilltec is extremely economical and guarantees a long tool life and cost-reduced tool utilisation. The Drilltec is available in 2xD, 3xD, 4xD and 5xD sizes and therefore offers flexibility for different requirements.
Boehlerit GmbH & Co. KG
Segment Cutting Tools
Werk VI-Straße 100
8605 Kapfenberg
Austria
Highest productivity with the smallest drill holes
The new Microtec tools for internal machining with additional holder are an innovative solution for turning small and narrow bores. The new Microtec tools consist of two parts: the clamping body and the drill shank. The clamping body is permanently mounted in the machine and has a holder for the drill shank. The boring bar can be replaced without removing the entire holder, making it easier and quicker to change the indexable insert. The five available boring bars are available for different drilling diameters and cutting edge angles and can be used with the existing CCGT030102, DCGT and VCGT minitools.
Boehlerit GmbH & Co.KG
Segment Cutting Tools
Werk VI-Straße 100
8605 Kapfenberg
Austria
The new milling grade generation BCM35M and BCM40M – Unsurpassed cutting power on stainless steels
Milling stainless steels is one of the most challenging tasks in machining technology. The extreme, sometimes downright contradictory properties of this material class ensure a high level of abrasive wear, suboptimal chip break and chemical reactions with the tool material that may lead to built-up edges and, in extreme cases, to tool breakage. Such high requirements demand a perfectly developed tool concept. With the new grade generation BCM35M and BCM40M, Boehlerit is facing up to the challenge of milling stainless steels. As a result of intense research and development, these grades reflect all technical aspects in an optimised form.
Boehlerit GmbH & Co.KG
Segment Cutting Tools
Werk VI-Straße 100
8605 Kapfenberg
Austria
The new Boehlerit carbide harrow blades as an optimal portfolio addition for mechanical weed control
In the 2022 season, the launch of the carbide harrow blade introduced the next step of the innovative carbide hoe blade for tough working conditions on combination seed drills compared to a backhoe. The cultivator share may also be used as a hoe blade in more difficult operating conditions. The Boehlerit harrow blade was one of the 20 products nominated for the Systems & Components Trophy at the Agritechnica 2022. In order to ensure that the product can withstand higher working speeds as well as more intense working depths and shocks, a reinforcement with an integrated tip is welded on. The thickness of the carbide segments was also adjusted in order to maintain the wear ratio between the carbide inserts and the steel hoe. The carbide harrow blade is available in widths of 100 – 200 mm and in 20 mm gradations with a range of intake elements for sprung tines.
The carbide cultivator sweep for stubble working and weed control was launched in spring 2019 and is now available in an optimised, reinforced version, with an integrated tip. The slightly lowered position of the tip makes digging easier and the specially arranged, small carbide segments retain their cutting power throughout the tool life of the product.
In addition, they provide outstanding operational quality and a high level of wear protection, retaining their operating width right until the end of the tool life. Carbide side elements are placed in such a way as to form a constant cutting line and absorb shocks during the working of the soil. The innovative "beaver's tooth" effect was also optimised, making the self-sharpening properties of the carbide cutting edge even more efficient. A complete novelty is the welded-on reinforcement in the intake area, which helps to prevent share breakage. The fact that the tip is integrated in the reinforcement means that it is fully protected. The carbide cultivator sweep is available in the widths 200 mm, 260 mm and 300 mm. In the 2022 season, two more sizes were added (370 mm and 420 mm), for particularly large working widths.
The longitudinal- and circular weld seam millling tools from Boehlerit
guarantee maximum precision and tool life in addition to maximum performance
A very essential part of the weld seam preparation of offshore wind towers is the right milling tool. Here, Boehlerit meets the challenges placed on the products due to the enormous workpiece dimensions. And these lie, among other things, in the tool life of the milling tools, which in the specific application reach diameters of between 950 and 1,100 mm. For optimal preparation of the weld seam, it has to be milled in several passes to a depth of two thirds of the material thickness. The lengths to be machined are therefore very large, but a constant tool change would be to the detriment of productivity and ultimately economic efficiency. Boehlerit offers decisive advantages here, because the inserts, which are specially designed for the required geometries, impress with maximum performance and long tool life, even with materials that are difficult to machine." In addition, high feed rates are possible.
Metal Show & TIB
14 to 17/05/2024
Bucharest, Romania
BIEMH
03 to 07/06/2024
Bilbao, Spain
DLG Feldtage
11 to 13/06/2024
Erwitte/Lippstadt, Germany
Expomaq
14 to 20/06/2024
León, Guanajuato, México, Hall C1, Booth 519
AMB
10 to 14/09/2024
Stuttgart, Germany, Hall 1, Booth G10
MAKTEK Eurasia
30 to 05/10/2024
Istanbul, Turkey
EIMA
06 to 10/11/2024
Bologna, Italy
Austro Agrar
20 to 23/11/2024
Tulln, Austria
Boehlerit received the "Work and Family" certificate
As part of our corporate culture, it is important to us that private and business life harmonise well. Topics such as flexible working hours or mobile working, adapted to the respective life situation, make a central contribution to being able to combine all tasks well.
Satisfaction as an important benchmark
The importance of family-friendliness will continue to be promoted and intensified on a professional and structured basis in the future. The holistic human resources strategy that has been developed is intended to improve the framework conditions for each individual and to lead to an optimal reconciliation of private and professional life in increasingly challenging times. In this way, we can sustainably keep the satisfaction of our employees always in focus.
We are very proud of the certification and thank everyone who supported us!
Foto © Harald Schlossko
Boehlerit received the "Work and Family" certificate
As part of our corporate culture, it is important to us that private and business life harmonise well. Topics such as flexible working hours or mobile working, adapted to the respective life situation, make a central contribution to being able to combine all tasks well.
Satisfaction as an important benchmark
The importance of family-friendliness will continue to be promoted and intensified on a professional and structured basis in the future. The holistic human resources strategy that has been developed is intended to improve the framework conditions for each individual and to lead to an optimal reconciliation of private and professional life in increasingly challenging times. In this way, we can sustainably keep the satisfaction of our employees always in focus.
We are very proud of the certification and thank everyone who supported us!
Foto © Harald Schlossko
New 4.0 ram extruder for innovative carbide products
Boehlerit has recently purchased one of the most developed ram extruders for the carbide manufacture of complex profiles aand rods.
Read more about it here!
Boehlerit is the winner of the Styrian Export Award 2022
The award in the category of large companies is based on the export success story of carbide-tipped wear parts for soil cultivation and mechanical weed control.
Read more about it here!
Technological leap ahead for the indexable insert grinding department, thanks to investment in precision
To continue to fulfil the quality requirements for increasingly small and precise indexable inserts used in small parts manufacturing, in particular in medical engineering and in the watchmaking industry, Boehlerit has invested in 5 state-ofthe-art Agathon peripheral grinding
machines.
Technological edge through investments in the sintering workshop
Boehlerit, the Austrian expert for carbides and cutting materials, wants to stay ahead of technological developments in future and has thus committed to a growth programme that envisages investments in sales, products and manufacturing. Ever-more sophisticated materials place high demands on tools, with quality requirements also becoming more stringent all the time.
Inside Boehlerit
The latest technologies and the highest quality standards for our high-end products.
Hard facts for best results
Technological edge through investments in the sintering workshop
Boehlerit, the Austrian expert for carbides and cutting materials, wants to stay ahead of technological developments in future and has thus committed to a growth programme that envisages investments in sales, products and manufacturing. Ever-more sophisticated materials place high demands on tools, with quality requirements also becoming more stringent all the time.
COVID-19: Information for Customers
Boehlerit has taken on responsibility in the fight against the spread of COVID-19 infections, whereby our top priority is to ensure the safety of our employees and business partners and to keep the risk of infection to an absolute minimum. At the same time, we are doing everything within our power to maintain uninterrupted production at all locations in order to meet all our delivery commitments and supply on time.
Boehlerit as official sponsor of EuroSkills 2021
We are part of it: We are proud to announce that we will be supporting EuroSkills, the European vocational championships, to be held in Graz from 06th to 10th January 2021, as an official sponsor. By making this commitment, we not only demonstrate our interest in a sound education for young people, but also play an active role in supporting these young skilled workers. EuroSkills is an international event at which around 600 competitors in 45 skills and trades compete over three days for the gold medal and the title as European champion in their own skill or trade. It is this very incredible motivation and ambition that make up this Skills spirit, which we at Boehlerit are delighted to support.
Plant-optimised dedusting plant
for shaping processes
The implementation of the dedusting plant is 90 % financed by funds from the IWB/EFRE regional programme.
More information about this project can be found here.